newsletter subscription
OPALE
12.09.2012

Something new!
Home automation  > Home Automation  > Modules
Home Automations modules

Home automation modules are designed to action the various functions of the HOME SAPIENS system in such a way that they interact according to external conditions (temperature, light, humidity etc.) in order to optimize the level of perceived comfort in the home while at the same time reducing energy consumption to a minimum and providing excellent security. The various modules function independently of the terminals, and they can be utilized with traditional electrical systems to create home automation systems at a truly reasonable price.

 

 


Download





News

HOME SAPIENS WEB INTERFACE
Home automation at hand
The goal is saving
A guide to the energy efficiency of your building


Articles

Analog input and output modules

OH/AO4010-OUTPUTS MODULE 4 analogue outputs module type 0-10V with 4 related digital outputs and 4 digital inputs. Allows up to 4 analogue outputs type 0-10V to be controlled to which 4 power on/off relays are related. Allows the management of devices used with standard 0-10V inputs, for example solenoid valves with proportional open/close, generic dimmers and fan coils. The 4 logics, configurable through the programming tool, with which you can check the outputs, are: manual, linear (for example to control the opening of a solenoid valve that manages the discharge of water depending on the level of water inside a pool), in step (for example set 4 levels of opening of solenoid valve depending on 4 thresholds of temperature for the area), pursuit (for example, to maintain a constant temperature within an environment, configuring the system so that it manages the opening of solenoid valves, hot and cold depending on the outdoor temperature to allow that inside to seek the set point value). Can be installed, with or without terminal covers, to the wall using the DINguide provided or in containers provided with DIN guide (dimensions 6 DINunits).
OH/AI4-INPUTS MODULE 4 analogue inputs module 0-10V, 4-20mA type. Done on miniaturised container, it's able to acquire up to 4 analogue inputs type 0-1V, 0-10V, 0-20mA, 4-20mA, or pulse signals up to 25 kHz. Allows the home automation system to use analogue signals from wind, rain, light, humidity, and temperature sensors necessary for the implementation of checks for savings, comfort and security (example: it ensures the security closure of blinds depending on wind speed). Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit). The module should be installed as far as possible in the vicinity of the sensor.
OH/DI2230 DIMMER MODULE 2X300W Dimmer module with 2 300W channels each, 2 digital inputs and 2 analogue 0-10V inputs for interfacing with light sensors. Allows the dimming of 2 300W loads or of a 500W load to be controlled putting in parallel with the outputs. The two analogue inputs and the two digital inputs to locally connect the light and dusk probes to allow light management for an optimal environment. it permits, for example the light of a room to be adjusted according to external light and works according to a manual, linear, in step or sought logic. Can be installed, with or without terminal covers, to the wall using the DINguide provided or in containers provided with DINguide (dimensions 6 DIN units).
OH/AO1010-OUTPUT MODULE 1 channel dimmer control module. The OH/AO1010 is a device necessary to manage an analog output 0-10V, to which is also connected an ON/OFF relay. This module could manage devices controllable with standard 0-10V input such as solenoid valves, traditional dimmers, fancoils. The 0-10 output could be controlled with 4 different logics, through the programming software: MANUAL LOGIC: if the related input is activated for less than 1 second, the OUTPUT is controlled in STEP by STEP mode. If the related input is activated for more than 2 seconds, the OUTPUT is controlled with a periodic ramp (always growing), starting from the value of the input closing. When the input will be released it is kept the value previously reached. Finally if the related input is activated for a time between 1 and 2 seconds, the output is piloted to the maximum value (100%). LINEAR LOGIC: the 0-10V output simulates, in a linear way (using a scale factor), the evolution of a related analog input in the system. STEP LOGIC: the 0-10V output takes specific values which are associated to analog input thresholds or to digital input activations. FOLLOWING LOGIC: the output is set to follow an analog input value of the system. The OH/AO1010 module can be installed in electrical boxes with DIN guide (size: 1 DIN unit) and can be placed in a recessed box of 3 or more modules. NB: the module OH/AO1010 replaces the module NH/DIM and it is programmable in the same way as per the OH/AO4010 module.

Automation modules

OH/MA-AUTOMATION MODULE Automation module. Done on miniaturised container, has 3 power relays for home automation management (blinds, etc.), through the local control buttons. Enables the checking of outputs through the three local inputs (up, down, stop with person present function (the shutter rises or falls with buttons pressed up or down and stops when they are released) and with window function (the pressure of the up and down buttons for less than a second allows the rise or fall of the shutter for a set time, by default 90 seconds). Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit) or wall-mounted with the protective cover provided as standard.

Digital input and output modules

OH/4I-INPUTS/OUTPUTS MODULE Module 4 digital inputs and 4 outputs for the LED guiding with low voltage. Done on miniaturised container it is able to manage up to 4 inputs and is able to control 4 LEDs in low voltage (power between 1.5 and 3.5 V) in any colour. Individual LEDs can be combined by programming software with 4 digital outputs of the system to get a visual feedback of their power on/off status. Also lets you select the mode of LED operation between always on, not inverting (on if relay closed), interveting (on if relay open). Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DINunit).
OH/RI4416-RELAY MODULE 4 digital outputs module with 16A with exchange and manual rearm and 4 digital inputs. Manages up to 4 power relays with 16Awith the opportunity to rearm the load manually in the case of faults. To this end there are in 4 levers accessible from the outside that allow the manual driving of the individual relays either in the NO (normally open) position or NC (normally closed) also in the event of lack of power to the module. Can be installed, with or without terminal covers, to the wall using the DINguide provided or in containers provided with DINguide (dimensions 6 DINunits)
OH/6I-INPUTS MODULE 6 digital inputs module. Done on miniaturised container, allows the connection of 6 inputs from command devices (buttons, sensors, etc.). Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit)
  OH/IR-IR RECEIVER MODULE
OH/RI-INPUTS MODULE 1 relay input/output module, 3 digital inputs. Done on miniaturised container, allows the connection of 3 inputs from command devices (buttons, sensors, etc.) and 1 output to an electrical load. Particularly indicated for activations of applications that require the location in loco (example activation of lights with interruption/deviation controls). Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit).
OH/RP-POWER RELAY MODULE 1 relay output module. Done on miniaturised container, has 1 output for an electrical load. Particularly indicated for activations of loads with high absorption. Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit).
OH/2RP-EXPANS.POWER RELAY MODULE 2 relay expansion module. Done on miniaturised container, has 1 output for other electrical loads. Is indicated for activations of loads with high absorption. Should always be used in combination with output module OH/RP, which represents the expansion. Is fitted with cable with connector coupling with a connection to the OH/RP module. Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit).
OH/3RPI-INPUTS/OUTPUTS MODULE 3 relay input/output module, 3 digital inputs. Done on miniaturised container, allows the connection of 3 inputs from command devices (buttons, etc.) and 3 outputs for electrical loads. Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit) or wall-mounted with the protective cover provided as standard

Probes

OH/STI-ROOM TEMPERATURE PROBE NTC 10k beta 3977 internal temperature probe. Used to detect the internal ambient temperature with 1.5 metre wire.
OH/STE-OUTSIDE TEMPERATURE PROBE NTC 10k beta 3977 external temperature probe. Used to detect the external ambient temperature with 1.5 metre wire.
OH/SLI-ROOM LIGHT SENSOR Light probe inside the wall 0-10V. Used to detect light in internal environments. The sensor has a built-in colour filter (green filter) which enables adaptation to the sensitivity of a human eye.
OH/SLE-OUTDOOR LIGHT SENSOR Light probe external to wall 0-10V. Used to detect light in external environments. The sensor has a built-in colour filter (green filter) which enables adaptation to the sensitivity of a human eye.
OH/SUT-TEMPER.AND HUMIDITY SENSOR 4-20mA humidity probe + NTC temperature probe compatible with OH/MT2 inputs on the wall. Used to detect he relative humidity and the temperature in internal environments.
OH/SLP-LIGHT AND MOTION SENSOR 0-10V light probe and PIR type presence sensor for ceiling installation. Used to detect light and movement in internal environments.
OH/SQA ROOM AIR QUALITY SENSOR Air quality probe can detect gas mixes. Used to detect air quality in internal environments. The sensor should detect the main gas mixes
  OH/ADJ BATTERY TEMPERATURE PROBE

Special functions modules

OH/MP6KW-CURRENT MEASURING MODULE Single phase module electricity reader 6kW. Allows the electric power to be read instantly on single phase up to a maximum of 6 kilowatts; allowing the system to manage the control of the loads and daily consumption. Prevents the general energy switch coming away and optimises management of consumption with a timetable. Can be installed, with or without terminal covers, to the wall using the DINguide provided or in containers provided with DINguide (dimensions 4 DIN units).

System modules

NH-RBB-230V DATA LINE REPEATER BPT bus repeater. Repeater for line given connects to the BPT home automation BUSand is used when you exceed the maximum distances between the devices and the Power supply, the maximum amount of cable laid or the maximum number of devices intended for the system. The apparatus is prepared for the link to emergency power (12 V DC, AC).
OH/ETH1-LAN INTERFACE Lan Interface The item permits to manage all the main home automation system functions (lights control, openings, temperature control, scenarios and security) through smartphones, PCs, IPhones and IPADs connceted to the local Ethernet or WI-FI and equipped with browsers HTML5-CSS3 compatible. All the functions are available on the web server integrated on the item so, any additional app. needs to be downloaded and isntalled on the remote control items. It is allowed the multi user login in to the system which will be identified using dedicated passwords. The connection to the OH/GW (cod. 67100701) is feasible using the OH/RS422 interface module. Power supplire used: VAS/100MH (cod. 67000700).
OH/RS422-RS422 INTERFACE MODULE Serial interface module It permits the connection of the OH/ETH1 LAN interface and of the C4/B2 Brahms Burglar alarm centrals to the OH/GW (cod. 67100701)
OH/GW-GATEWAY Gateway terminals Can be installed, with or without terminal covers, to the wall using the DIN guide provided or in containers provided with DIN guide (dimensions 4 DIN)

Zone temperature modules

OH/Z.02 GR-TEMPER.CONTROL MODULE Temperature control area module
OH/Z.02 BB-TEMPER.CONTROL MODULE Temperature control area module
OH/Z.02 SV-TEMPER.CONTROL MODULE Temperature control area module. Allows the temperature control on the area in which it is located. It is possible to select the operating mode (automatic/manual), to modify the ambient temperature or exclude the temperature control for the area concerned. The module can be inserted inside the normal embedded boxes 3 standard modules (BPT plate included in the pack).
OH/FAN-FANCOIL CONTROL MODULE Fan coil basic control module 3 digital outputs for direct management of fan speed and 3 additional digital inputs. Done on miniaturised container it is able to manage a three-speed fan coil unit, by connecting the 3 relays to the fan coil input in order to be able to select one of the fan speeds at whim. It can also, configured by programming software, automatically check the operation of a thermal area fan coil by adjusting the fan speed also through an activation input window contact (automatically turns the fan-coil if a window is open) and by sending the commands to the area's solenoid valves. Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit) or wall-mounted with the protective cover provided as standard.
OH/FANEVO-FANCOIL CONTROL MODULE Advanced control fan coil. 3 digital outputs for direct management of fan speed and 2 outputs 0-10V analogues to manage the solenoid valves; 2 digital inputs and 1 PTC analogue input. Allows complete management of a three-speed fan coil unit and 2 0-10v of hot and cold solenoid valves (it is therefore able to monitor both the fan speed and the influx of water to the fan coil unit). Through the analogue input and the 2 digital inputs it can also receive data from the temperature sensors or authorisations from window contacts in order to manage its own thermal area. The system will heat up if the temperature is found to be too low and will cool down if too high, independently, without the need for any terminal in its basic functionality and without additional modules. Can be installed, with or without terminal covers, to the wall using the DINguide provided or in containers provided with DINguide (dimensions 6 DINunits).
OH/MT2-INPUTS MODULE Module 2 inputs for PTC or thermocouple temperature probes and 2 0-10V inputs for humidity probes. Allows data to be acquired from 2 analogue inputs for humidity probes type 4-20ma and 2 inputs for specific PTC temperature probes and is therefore capable of detecting temperature and humidity and provide them to the system by bus. Can be installed in boxes fitted with DIN guide and may also be placed in the bottom of an embedded box of 3 or more modules (hindrance 1 DIN unit).
Conditions of use | Credits | Privacy Policy | General conditions of purchase
©2013 BPT S.p.A. a Socio unico - P.IVA 00180540270