INTERNATIONAL | change country
 






newsletter subscription
Home automation  > Video Entry System  > System equipments
Other Components

 

Power supply modules, wiring... BPT's product range is completed by a host of articles that improve and increase their efficiency and performance.

 


Articles

Accessories

Amplifier/call repeater

VAS/101-230V POWER SUPPLIER Audio entry system and/or supplementary power module for X1/X IP systems. Plastic housing, for installation in electrical control panels (EN50022). Dimensions: 4 low-profi le DIN modules. Protection rating IP30. Complete circuit board for power supply to entry panels and receivers (18V DC - 1 A max). Electronic circuit-breaker for protection against overloads/short-circuits. Terminals for control of riser bus. Fitted with terminals for connection of the device power supply modules. Powered by mains circuit 230V AC 50/60 Hz.
XAS/301.01-230V LINE REPEATER Power supply module/repeater for audio, video and data signals.Plastic housing, for installation in electrical control panels (EN50022). Dimensions: 12 low-profile DIN modules. Protection rating IP30. Complete circuit board for device control (20V DC - 0.8 8 AA max). Electronic circuit-breaker for protection against overloads/short-circuits. Complete with terminals for control of IN and OUT bus and 9 switch for compensation of signal according to distance. 2 LEDs for confirmation of connection and data transfer.Potentiometers for compensation of audio volume to and from the receiver. Powered by mains circuit 230V AC 50/60 Hz.
RIR/08 DATA LINE REPEATER Data line repeater for XIP system.Data line repeater for BPT's XIP digital video entry system. Designed for installation on DIN guides either on the wall or built into watertight embedding boxes.
XDV/300A-AMPLIFIED VIDEO DISTRIB. Video signal amplifier.Miniaturized plastic housing for installation in junction boxes (dimensions 60x44x16 mm) or electrical control panels (EN50022), dimensions: 1 low-profile DIN module. Complete with IN/OUT terminals for video signal and two switches for compensation of the signals for the method of connection. Power supply directly from X1 bus, absorption 20 mA max.
RIR/300LR-DATA LINE REPEATER Repeater for System 300 data line, dimensions 60x44x16 mm.

Audio/video units

Devices and software

DREAD-KEYS READER FOR PC USB interface with keypad emulation for reading of RFID devices.Used to read devices for entering codes in programming software (tools and web).
IPC/301LR-PC INTERFACE Programming interface with PC software.
ETI/XIP-LAN NETWORK INTERFACE XIP Gateway for Ethernet.The ethernet gateway makes it possible to use the data network for the creation of an access control system. Plastic housing, for installation in electrical control panels (EN50022). Dimensions: 8 low-profile DIN modules. Protection rating IP30. The circuit board includes a quick connector for VA/08 power supply modules, two RJ45 ports in "switch" configuration for ethernet 10/100 and terminals for direct connection to an entry panel. Also features three configurable inputs and a serial port for maintenance and diagnostics. Three LEDs for signalling of communication and system status. The gateway supports the XIP and SIP protocols. It utilizes H.264 video compression and ULAV audio compression and can handle up to two audio/video calls simultaneously. Also includes BDDE and access control functions. Power supply 18V DC 250 mA.
  ETI/XIP-APP LAN NETWORK INTERFACE LAN interface
ETI/MINISER XIP LAN NETWORK SERVER XIP system server. The ETI/miniSER server manages calls and transfers to analogue receivers and can centralise access control functions. Includes 6 UNIVERSAL licences that can be configured as LIC/APP or LIC/GST (also in mixed mode) to allow interfacing with the system and management of communications of mobile devices equipped with the XIP/Mobile app, or of third-party devices. The server is equipped with two 10/100 Mbits Ethernet interfaces with an RJ45 connector that can be configured in "switch" or "dual-network" mode and a USB port to export event logs. Required power supply (12 - 24V DC, 300 mA max).
ETI/SER XIP V2 XIP server system Allows software for porters, Soft Receivers on PC, video entry system Apps and thirdparty receivers to be used, and centralises the access control functions and the porter services. Is produced in a container 150x150x51 mm in size. IP40 Protection rating: The server includes an RJ45 connector for 10/100/1000BaseT Ethernet networks, a DVI connector to connect a digital monitor (just for diagnostics), 2 USB 2.0 ports for maintenance operations. The server has a default licence that can be used for the Porter software or the Soft-Receiver software. 12V DC power supply (power unit/ transformer included).
PCS/XIP PROGRAMMING SW FOR LAN Programming software for X1/X IP systems for Windows XP (SP2) operating system (or later).System requirements: PC with PENTIUM III 700 MHz processor or better, 128 MB available RAM, minimum space on HD 40MB, XVGA video card. Contents of box: 4 m USB cable, 2 GB pen drive. Disk includes software and user manual.

Interface modules

Porter switchboard

Power supply

AS/200-POWER SUPPLIER 230V Power supplier 230V, 50Hz, 15VA. 4 DIN units, low profile module.
A/200R-POWER SUPPLIER 230V Audio entry system main power supplier 230V, 15VA. 4 DIN units low profile module. Sistem 200.
A/200N-POWER SUPPLIER 230V Main power supplier 230V, 15VA. 6 DIN units low profile module.
VA/08-230V POWER SUPPLIER Power supply module for video entry panel for XIP systems.Plastic housing, for installation in electrical control panels (EN50022). Dimensions: 12 low-profi le DIN modules. Protection rating IP30. Complete circuit board for control of entry panels (18V DC - 1.1 A max) and for control of the video entry system riser (20V DC - 0.8 A max). Electronic circuit-breaker for protection against overloads/short-circuits. Terminals for control of riser bus and terminals for connection of an audio/video/bus for 4 entry panels. Open-collector outputs for auxiliary functions (AUX1 and AUX2). RS232 serial ports (for future functions) and mini USB for programming from PC (with LED indicators for 'connection' and 'data being transferred'). Serial connector for network devices. Manual system programming button with indicator LED. Jumper for access to programming of access control devices (cards and keys). Powered by mains circuit 230V AC 50/60 Hz.
VA/01-230V POWER SUPPLIER Video entry system power supply module for X1 systems. Plastic housing, for installation in electrical control panels (EN50022). Dimensions: 12 low-profi le DIN modules. Protection rating IP30. VSE/301 integrated intercom selector. Complete circuit board for control of entry panels (18V DC - 1.1 A max) and for control of the video entry system riser (20V DC - 0.8 A max). Electronic circuit-breaker for protection against overloads/short-circuits. Terminals for control of riser bus and terminals for bus connection to 3 entry panels. Open-collector outputs for auxiliary functions (AUX1 and AUX2). RS232 serial ports (for future functions) and mini USB for programming from PC (with LED indicators for 'connection' and 'data being transferred'). Manual system programming button with indicator LED. Jumper for access to programming of access control devices (cards and keys). Powered by mains circuit 230V AC 50/60 Hz.
VA/200.01-230V POWER SUPPLIER Power supplier 230V, 50 Hz, 60 VA. 12 DIN units, low profile module sistem 200.
VAS/100.30-230V POWER SUPPLIER Audio entry system and/or supplementary power module for X1/X IP systems. Plastic housing, for installation in electrical control panels (EN50022). Dimensions: 8 low-profi le DIN modules. Protection rating IP30. Electronic circuit-breaker for protection against overloads/short-circuits. Complete with output terminals for power supply to devices (17.5V DC - 1.7 A max). Powered by mains circuit 230V AC 50/60 Hz. If used as the the only power supply module for the system, RFID and DNA modules can not be used for access control.
VA/301-230V POWER SUPPLIER Power supplier 230V, 50/60Hz, 12 DIN units low profile module. Sistem X1 and 300.
XA/301LR-230V POWER SUPPLIER Power supplier/control unit 230V, 50Hz, 80VA. 12 DIN units, low profile module.

Relay and actuators

IOD/303LR-REMOTE ACTUATOR LON RS 485 3-relays actuator. 4 DIN units low profi le module.
AC/200 CALL ADAPTER Call adapter. Dimensions: 60x44x16 mm.
VLS/3 - 3 RELAYS MODULE Triple-relay unit for auxiliary devices (lights, apertures, acoustic alarms etc.).Plastic housing for installation in electrical control panels (EN50022), dimensions 4 low-profile DIN modules. Protection rating IP30. The three relays, with a switching contact, are associated by default to the door aperture and AUX2 commands from the receivers. Switching power 5A resitive (2A inductive) at a maximum voltage of 250V AC. Complete with 2 active grounded inputs for connection of pushbuttons for local actioning of two of the three relays and a button for programming the method of activation of the receivers with LED to signal data reception from the BUS line.Power supply 11/18V DC 200 mA.
VLS/101M Relay unit for auxiliary services (control of lights, openings, ringtones etc.). Manufactured in a MINIATURE CASE DIMENSIONS 85.5X60X21MM, can be installed on DIN rails (EN50022) inside switchboards. The relay includes pulse-type switching contacts to control the electrical service requested (interruption power 5 A resistive - 2 A inductive max voltage 250V AC) and can be controlled by direct/alternating currents from 10V to 24V, or by low-level electrical signals coming from the system. 10/24V AC/DC power supply, MAX CONSUMPTION 40 mA.
VLS/300-REMOTE ACTUATOR Relay unit for auxiliary devices (lights, apertures, acoustic alarms, etc.).Plastic housing for installation in electrical control panels (EN50022), dimensions 4 low-profile DIN modules. Protection rating IP30. The unit features two relays with a switching contact, switching power 2A resistive (1A inductive) at a maximum voltage of 250V AC (excitation coil with power supply 10/14V AC or 14/18V DC - 50 mA). The two relays are associated by default to the door aperture and AUX2 commands. The unit also features 6 switch for programming of the command, one potentiometer for regulation of the activation time of relay 1 (door aperture) and one LED indicating the data reception status on the BUS line.

Selectors

SI/200-ENTRY PANEL SELECTOR Entrance selector for audio residential installations; allows the selection of 2 entry panels. 8 DIN units, low profile module.
VSC/08-4 CAMERAS SELECTOR Manual cyclic selector for CCTV for XIP system.Miniaturized housing for installation in junction boxes (dimensions 85.5x60x21 mm) or electrical control panels (EN50022), dimensions: 1 low-profile DIN module. Complete with 8 input terminals for video signal from 4 standard B/W or colour video cameras (standard CCIR/EIA or PAL/NTSC) and three switches for programming of the video cameras con connected. Key for access to programming mode. 7 LEDs indicating "video camera connected" and programming/data status. Powered by external power supply module 12V DC 0.09 A max.
VSC/01- 4 CAMERAS SELECTOR Manual cyclic selector for CCTV for X1 systems.Miniaturized housing for installation in junction boxes (dimensions 85.5x60x21 mm) or electrical control panels (EN50022), dimensions: 1 low-profile DIN module. Complete with 8 input terminals for video signal from 4 standard B/W colour video cameras (standard CCIR/EIA or PAL/NTSC) and three switches for programming of the number of video cameras connected. Key for access to programming mode. 7 LEDs indicating "video camera connected" and programming/data status. Power supply module 12V DC 0.09 A max.
VSI/200-ENTRANCE SELECTOR Entrance selector for video residential installations; allows the selection of 2 entry panels. 12 DIN units, low profile module.
ICB/300-BLOCK SELECTOR Block selector, 6 DIN units, low profile module.
VSE/301 INTERCOM SELECTOR-SYST Intercom function selector for X1/XIP systems.Plastic housing for installation in electrical control panels (EN50022). Dimensions: 8 low-profile DIN modules. Protection rating IP30. Complete with 4 terminals for IN/OUT to the bus line, as well as two switch for access to programming and resetting of the data stored in memory. Powered by mains circuit 230V AC 50/60 Hz.
VSE/301.01-INTERCOM SELECTOR 230V Intercom function selector for X1/XIP systems.Plastic housing for installation in electrical control panels (EN50022). Dimensions: 8 low-profile DIN modules. Protection rating IP30. Complete with 4 terminals for IN/OUT to the bus line, as well as two switch for access to programming and resetting of the data stored in memory. Powered by mains circuit 230V AC 50/60 Hz.
VSE/200.01 INTERCOM SELECTOR Selector for intercoms.

Video distributors

VAV/400P-VIDEO DISTRIBUTOR 4-output video distributor, wall-mounted, for coaxial cable. Dimensions 195x105x42 mm.
VAV/600-VIDEO DISTRIBUTOR 4-output video distributor, wall-mounted, for coaxial cable. 12 DIN units, high profile module.
VDX/400-AMPLIFIED VIDEO DISTRIBUTOR Miniaturized 4-output video distributor for twisted pair. Dimensions 60x44x16 mm.
VDV/400-AMPLIFIED VIDEO DISTRIBUTOR Miniaturized 4-output video distributor for coaxial cable. Dimensions 60x44x16 mm.
XDV/304-VIDEO DISTRIBUTOR 4-output video signal distributor.Miniaturized housing for installation in junction boxes (dimensions 60x44x16 mm) or electrical control panels (EN50022), dimensions: 1 low-profile DIN module. Complete with 8 input terminals for 4 twisted pairs from the receivers and 4 terminals for IN/OUT connection from the riser. Line impedance closure jumper for each output. Passive device (power not needed).
XDV/303-BIDIRECT.VIDEO DISTRIBUTOR Bidirectional video distributor, 8-unit slimline module with DIN guides.Balanced video signal distributor for distribution or concentration of cable transmission lines.
XDV/304A-AMPLIFIED VIDEO DISTRIB. 4-output video signal distributor, amplified.Plastic housing for installation in electrical control panels (EN50022). Dimensions 4 low-profile DIN modules. Protection rating IP30. Complete with 8 input terminals for 4 twisted pairs from the receivers and 4 terminals for IN/OUT connection from the riser. Line impedance closure jumper for each output. Requires power supply (14 - 18V DC, 60 mA).

Wires

VCM/60 BI-CABLE Cable with 5 wires and a coaxial cable. Used to connect power supplier to monitors. Reel of 100 metres. External diameter of sheath: 9 mm.
VCM/130 GR-CABLE Cable with 12 wires and a coaxial cable. Used to connect power supplier to entry panel. Reel of 150 metres. External diameter of sheath: 12.5 mm.
VCM/40 BI-CABLE Cable with 3 wires and a coaxial cable. Used to connect entry panel to separate surveillance unit. Reel of 100 metres. External diameter of sheath: 8 mm.
VCM/60-7 BI-CABLE Cable with 5 wires and a coaxial cable, with 7 additional wires. Used to connect power supplier to monitors. Reel of 100 metres. External diameter of sheath: 12 mm.
VCM/60-11 BI-CABLE Cable with 5 wires and a coaxial cable, with 11 additional wires. Used to connect power supplier to porter switchboard. Reel of 100 metres. External diameter of sheath: 13.5 mm.
VCM/60/500-CABLE Cable with 5 wires and a coaxial cable.Used to connect power supplier to monitors. Reel of 500 metres. External diameter of sheath: 9 mm.
VCM/130/500-CABLE Cable with 12 wires and a coaxial cable. Used to connect power supplier to entry panel. Reel of 500 metres. External diameter of sheath: 12.5 mm.
VCM/2D-CABLE Cable with two 0.28 mm² twisted pairs and two 1 mm² wires. PVC insulating sheath, diameter 8 mm, colour: RAL 1021 yellow. Twisted pair, 70 mm twist pitch. Tinned copper wires. Colour: white/light blue and light blue for twisted pair - red and green for power supply wires. Nominal impedance of twisted pair 100 ohm (f=1 MHz), capacitance 50 pF (at 20°C).Minimum cable curvature 80 mm. Fully compliant with CEI 46-6 (latest amendment), CEI 20-11 (latest amendment), CEI 20-37. Supplied in 100m coils.
VCM/2D/500-CABLE Cable with two 0.28 mm² twisted pairs and two 1 mm² wires.PVC insulating sheath, diameter 8 mm, colour: RAL 1021 yellow. Twisted pair, 70 mm twist pitch. Tinned copper wires. Colour: white/light blue and light blue for twisted pair - red and green for power supply wires. Nominal impedance of twisted pair 100 ohm (f=1 MHz), capacitance 50 pF (at 20°C). Minimum cable curvature 80 mm. Fully compliant with CEI 46-6 (latest amendment)/CEI 20-11 (latest amendment)/CEI 20-37.Supplied in 500m coils.
VCM/4D-CABLE Cable with three 0.28 mm² twisted pairs and 2 wires (section 1.5 mm²).PVC insulating sheath, diameter 11 mm, colour: RAL 1021 yellow. Twisted pair, 70 mm twist pitch. Tinned copper wires. Colour: blue/blue-white, brown/brown-white, orange/orange-white for twisted pairs - red and green for power supply wires. Nominal impedance of twisted pairs 100 ohm (f=1 MHz), capacitance 50 pF (at 20°C). Minimum cable curvature 150 mm. Fully compliant with CEI 46-6 (latest amendment)/CEI 20-11 (latest amendment)/CEI 20-37. Supplied in 100m coils.
VCM/4D/500-CABLE Cable with three 0.28 mm² twisted pairs and 2 wires (section 1.5 mm²).PVC insulating sheath, diameter 11 mm, colour: RAL 1021 yellow. Twisted pair, 70 mm twist pitch. Tinned copper wires. Colour: blue/blue-white, brown/brown-white, orange/orange-white for twisted pairs - red and green for power supply wires. Nominal impedance of twisted pairs 100 ohm (f=1 MHz), capacitance 50 pF (at 20°C). Minimum cable curvature 150 mm. Fully compliant with CEI 46-6 (latest amendment)/CEI 20-11 (latest amendment)/CEI 20-37.Supplied in 500m coils.
VCM/1D-CABLE Cable with 1 mm² twisted pair. PVC insulating sheath, diameter 7 mm, colour RAL 1021 yellow. Twist pitch 10 twists/m. Tinned copper wires, colour: RAL 9001 white and RAL 5015 blue. Nominal impedance 100 ohm (f=1 MHz), capacitance 50 pF (at 20°C).Minimum cable curvature 80 mm. Fully compliant with CEI 46-6 (latest amendment).Supplied in 100 m coils.
VCM/1D/500-CABLE Cable with 1 mm² wisted pair.PVC insulating sheath, diameter 7 mm, colour: RAL 1021 yellow. Twist pitch 10 twists/m. Tinned copper wires, colours: RAL 9001 white and RAL 5015 blue. Nominal impedance 100 ohm (f=1 MHz), capacitance 50 pF (at 20°C).Minimum cable curvature 80 mm. Fully compliant with CEI 46-6 (latest amendment).Supplied in 500 m coils.